Product Description
The Series 600B Conventional Fire Alarm Control Panel is designed to meet the requirements of BS EN 54 and BS 5839. Available in 2 zones with internal power supply and space for Sealed Lead acid Batteries .
The internal power supply is rated at 1. 0 Amp. Each Zone can be configured for either 2 WIRE ( Detectors, Call Points and Sounders on the same two wires) or normal zone operation via internal selector switches.
The panel is housed in an attractively finished metal enclosure with all user controls and indications located on the front panel together with clear operating instructions . A bezel can be fitted to the back Box to enable the control panel to be flush mounted . Special Colours and non standard finishes are available to special order . Ample cable entries are provided at the top of the enclosure.
In normal Zone mode operation control panel can allow for continued operation of the field devices upon removal of a plug-in device from the detection line by using an external active end of line ( ordered separately) . End of line resistors are supplied as standard and are used for 2 WIRE panel operation.
The panels are suitable for connection to pre BS5839 type systems including 3 wire . The zone electronics can be changed to “ short circuit for Fire condition “ thus removing the requirement to fit series resistors in existing Call Points .
Both zones can be modified by the use of internal jumper links for short circuit Fire , non latching and Isolate , thus making the Panel suitable for use in shopping centre installations .
