Product Description
The Series 1000 MK4 range of Conventional Fire Alarm Control Panels are designed to conform to BS 5839 Part 4. Available in a standard range from 2 to 36 zones each with internal power supply and space for Sealed Lead acid Batteries . The internal power supply can be supplied from 3 ratings :- 1.25 Amp , 3 Amp or 5 Amp .
The panels are housed in an attractive metal enclosure with all user controls and indications located on the front fascia together with clear operating instructions . A bezel can be fitted to the back Box to enable the control panel to be flush mounted . Special Colours or non standard finishes are available to special order . A Glazed Outer Door Version Is also available .
The series 1000 MK4 control panels allow for continued operation of the field devices upon removal of a plug-in device from the detection line . This is achieved with a external active end of line device ( These need to be ordered separately ).
The panels are suitable for connection to pre BS5839 type systems including 3 wire . The zone electronics can be changed to “ short circuit for Fire condition “ thus removing the requirement to fit series resistors in existing Call Points . Ample cable entries are provided at the top of the enclosure and removable chassis plates are provided on the larger Panels . The Electronics are based upon a system of “ Motherboards “ with plug-in modules allowing customising of the panel to the site requirements .
